How to Use your Slicer Board

Set up your Slicer Board in three steps, slice evenly, grate garlic and ginger, and keep it in great shape. Printable instructions included.

By Mikaela Numrich 2 min readUpdated November 15, 2026
How to Use your Slicer Board

A quick note on the Slicer Board

When our first boards arrived, we found the fit with the Slicer wasn't consistent from board to board. Some paired perfectly, and some didn't slice the way they should.

We can't test every board before it ships from our warehouse, so we've taken the board off our website for now while we work with our factory on a fix.

Got your board at one of our trade show booths? You're all set. Every board we sell in person comes from a batch we've tested ourselves.

Ordered yours online and it isn't slicing right? Send a quick photo or video to info@spartankitchen.ca and we'll make it right.

The Slicer Board turns your Spartan Slicer into a hand mandoline for even slices, and flips over to grate garlic and ginger. Here's how to set it up and get the most out of it.

Set it up in three steps

  1. Board logo up. Hold the Board with its logo facing up.
  2. Slide it through. Turn your Slicer logo side down and slide the Board through its handle.
  3. Rest the blade. Keep sliding until the blade rests in the grooves of the Board.

Set it over a bowl or lay it flat on a cutting board, and you're ready to slice.

Slicing

  • Hold the Board steady by its end.
  • Press the food flat against the Board and slide it across the blade with steady, even pressure.
  • Slices drop through, and the holes keep them from sticking.
  • Working over a bowl? Pick one small enough for the Board to sit across the top.

Great for potatoes, apples, cucumber, radish and carrot coins.

Grating garlic and ginger

  • Slide the Slicer out first.
  • Flip the Board over to the ridged holes on the back.
  • Rub a peeled clove of garlic or a knob of ginger over the ridges.

Tip! Grate straight over the pan or a small dish, then tap the Board to release the last bits.

Safety first

  • The blade is Japanese-design stainless steel and very sharp. Keep fingers clear.
  • Use a fork to hold short ends.
  • Don't slice down to the last bit. Keep it for snacking.
  • To put the safety cap back on, line the blade up with the handle, roll the cap on and hold the Slicer by its long edges.

Care and storage

  • Hand wash the Board in warm, soapy water and dry it well.
  • Your Spartan tools are dishwasher safe, but we recommend hand washing with a bristled brush. Pat dry.
  • The Board stores flat in a drawer. Cap the Slicer before you put it away.

Sharp for 20 years and guaranteed for life.

Safety first

The blade is very sharp. Always be mindful to keep fingers clear of the blade, and put the cap back on before it goes in the drawer. Keep it out of reach of kids.

Guaranteed for life

If the blade dulls within 20 years, we replace it for free. Breakage, rust and bending are covered for life.

Start a warranty claim